MTVG - Multitech Valve Guided Gate

Pins permanently guided with low gate wear

The MTVG range, with pneumatic pin injector on plate, is basically designed for high output packaging applications using non loaded polyolefin with MFI exceeding 10g/10’.

The system is made with stainless steel materials, and does not need lubrication, thus suitable also for sterile environments. The insert is produced in special material to ensure optimal resistance to wear. To improve resistance to wear and aesthetic qualities of the injection tip even further, the pins are entirely coated with a special surface treatment. The MTVG range differs from MTV in that the pins are guided permanently. The channel is integral.


  • Possibility of adjusting the position of the pin directly on the press without having the open the hot half with the mould;
  • Pins already shaped and coated;
  • Possibility of accessing the entire movement unit without opening the hot half;
  • The use of special materials and the pin guide system ensure unrivalled durability;
  • Leak free system.