HRS

Caps & Closures

  • Article: Flip Top Cap
  • Material: PP
  • Weight: 3,5 g
  • Wall thickness: 1 mm
  • Hot runner system: Multitech Hot runner
  • Number of injection points: 4
  • Type of injection: Thermal gate
  • Nozzle type: MT22 A15
  • Article: Oil Cap
  • Material: LLDPE
  • Weight: 2 g
  • Wall thickness: 0,8 mm
  • Hot runner system: Multitech Hot Half
  • Number of injection points: 32
  • Type of injection: Thermal gate
  • Nozzle type: MT22
  • Article: Doypack cap
  • Material: HDPE
  • Weight: 1 g
  • Wall thickness: 1 mm
  • Hot runner system: Multitech Hot Half
  • Number of injection points: 32
  • Type of injection: Thermal gate
  • Nozzle type: MT29
  • Article: Yogurt cap
  • Material: HDPE
  • Weight: 1 g
  • Wall thickness: 0,8 mm
  • Hot runner system: Multitech Hot Half
  • Number of injection points: 64
  • Type of injection: Thermal gate
  • Nozzle type: MT29 A5
  • Article: Bottle Canteen Cap
  • Material: PP-TPE
  • Weight: 12 g
  • Hot runner system: MultiTech hot runner
  • Number of injection points: 2+2
  • Type of injection: Free flow
  • Nozzle type: MT29 and MTV22
  • Article: Vodka cover cap
  • Material: PP MFI 12
  • Weight: 6 g
  • Hot runner system: MultiTech hot runner
  • Number of injection points: 8
  • Type of injection: Valve Gate
  • Nozzle type: MTV39-75
  • Article: Water Cap
  • Material: HDPE
  • Weight: 2,2 g
  • Wall thickness: 1,3 mm
  • Hot runner system: Multitech Hot Half
  • Number of injection points: 72
  • Type of injection: Thermal gate
  • Nozzle type: MTF39
  • Article: Roll-on cap
  • Material: PP
  • Weight: 6 g + 2 g
  • Wall thickness: 1mm
  • Hot runner system: Multitech hot runner
  • Number of injection points: 8+4
  • Type of injection: Thermal gate
  • Nozzle type: MT29
  • Article: Milk cap
  • Material: PEHD MFI 40
  • Weight: 3,5 g
  • Wall thickness: 1 mm
  • Hot runner system: Multitech hot Half
  • Number of injection points: 48
  • Type of injection: Thermal gate
  • Nozzle type: MT29
  • Article: Vodka body cap
  • Material: PET
  • Weight: 10 g
  • Wall thickness: 1,5 mm
  • Hot runner system: Multitech Hot Half
  • Number of injection points: 24
  • Type of injection: Valve Gate
  • Nozzle type: MTV39
  • Article: Still water cap
  • Material: HDPE
  • Weight: 1.55 g
  • Wall thickness: 1.2 mm
  • Hot runner system: MultiTech Hot Half
  • Number of injection points: 72
  • Type of injection: Thermal gate
  • Nozzle type: MTF39